Roller Shutter Components

Barrel Castings, End Locks, Wind Locks

Barrel Castings, End Locks, Wind Locks

Gears, Pinions, Platewheels & Sprockets

Gears, Pinions, Platewheels & Sprockets

NV304 - Pinion 12T x 6 DP & Sprocket 19T x ½" x ⁵⁄₁₆" Pitch

NV304 - Pinion 12T x 6 DP & Sprocket 19T x ½" x ⁵⁄₁₆" Pitch

NV304 - Pinion 12T x 6 DP & Sprocket 19T x ½" x ⁵⁄₁₆" Pitch Technical Details: Manufactured to DIN 8187 ISO/R-606 Welded Plate to Pinion & Machined Machined Faced Machined Bored (See Product List for sizes) Machined Gearcut (See Product List for Pitch & Tooth Thickness) ...

View More
Wishlist
Compare
NV305 - 36T Wormwheel

NV305 - 36T Wormwheel

NV305L 36T Wormwheel for 5" Tube LH NV305R 36T Wormwheel for 5" Tube RH ...

View More
Wishlist
Compare
NV306 - Worm Shaft - Steel - Two Start

NV306 - Worm Shaft - Steel - Two Start

NV306 Two Start Worm Shaft Product Codes: NV306L Two Shaft Worm Shaft - LH NV306R Two Start Worm Shaft - RH This model is handed so please specify which hand when ordering. Manufactured Shaft from Steel...

View More
Wishlist
Compare
NV307 - Worm Shaft - Steel - 3 Start

NV307 - Worm Shaft - Steel - 3 Start

NV307 3 Start Worm Shaft Steel Machined Shaft with Worm Gear....

View More
Wishlist
Compare
NV310* - Transmission Drive Chain

NV310* - Transmission Drive Chain

NV310* - Transmission Drive Chain NV310 1/2" Pitch x 5/16" Simplex Drive Chain NV310A 1/2" Pitch Drive Chain 5/16 Cut to 86 Pitches NV310B 1/2" Pitch Drive Chain 50Mtr Roll 08B-1 NV310C 1/2" Pitch Drive Duplex Drive Chain NV310D 1/2" Pitch x 3/16" Simplex Drive Chain NV310E 1/2" Pitc...

View More
Wishlist
Compare
NV311* - Drive Chain Connecting Links

NV311* - Drive Chain Connecting Links

NV311* - Drive Chain Connecting Links NV311 1⁄2" x 5⁄16" Pitch Connecting Link For Drive Chain NV311A 1⁄2" Pitch Connecting Link For Duplex Drive Chain NV311B 1⁄2" x 3⁄16" Pitch Connecting Link NV311C 1⁄2" x 5⁄16" Pitch Offset Link (Half Link) ...

View More
Wishlist
Compare
NV314 - Spring Anchor - Steel - 75mm Ø Boss

NV314 - Spring Anchor - Steel - 75mm Ø Boss

NV314 - Spring Anchor - Steel - 75mm Ø Boss Technical Details: Bright Mild Steel Machined Bore Welded Plate Drilled 13mm Ø Hole Plain Bore Steel Boss 75mm Ø x 60mm Long 10mm Steel Plate 87mm L x 60mm W Product codes: NV314 --- SPRING ANCHOR - STEEL - 75mm DI...

View More
Wishlist
Compare
NV315 - Spring Anchor - Steel - Boss for 8” Ø Tube

NV315 - Spring Anchor - Steel - Boss for 8” Ø Tube

Technical Details: Bright Mild Steel Machined Bore Welded Lasercut Plate Plain Bore Boss Sizes (See Product Code list below) 20mm Mild Steel Plate 190mm Ø   Product Code: NV315 ----- SPRING ANCHOR - STEEL - 8" - 1.1/4" BORE, 75mm BOSS NV315A --- SPRING A...

View More
Wishlist
Compare
NV317 End Block - Cast - 5" Tube

NV317 End Block - Cast - 5" Tube

NV317 End Block - Cast - 5" Tube NV317 End Block - Steel - 5% Tube 127mm Ø Please Note: Steel Blocks can be manufactured to your own specification. specifications listed below are options available. If yo do not see what you want, contact the office on 01282 615239 or sales@nvmgroup.co.uk Tech...

View More
Wishlist
Compare
NV325 - Wind Lock - Cast - Zinc Plated & Drilled

NV325 - Wind Lock - Cast - Zinc Plated & Drilled

NV325 - Wind Lock - Cast - Zinc Plated & Drilled Technical Details: Zinc Plated Finish Drilled 3 Holes to suit 4.8mm Ø Rivet Body 190mm L x 45mm W at the Guide side For Heavy Duty usage ...

View More
Wishlist
Compare
NV326 - Pinion/Sprocket Assembly - Steel - 12T x 5 DP Pinion & 19t x ½” x ⁵⁄₁₆” Pitch Sprocket for Double Reduction Sets

NV326 - Pinion/Sprocket Assembly - Steel - 12T x 5 DP Pinion & 19t x ½” x ⁵⁄₁₆” Pitch Sprocket for Double Reduction Sets

NV326 - Pinion/Sprocket Assembly - Steel - 12T x 5 DP Pinion & 19t x ½” x ⁵⁄₁₆” Pitch Sprocket for Double Reduction Sets Technical Details: Manufactured to BS 436 Machined Faced (See product List for gear Widths) Machined Bored (See Product List for sizes) Machined Gearcut (See Pr...

View More
Wishlist
Compare
NV330 - Sprocket - 14T x ½" x ⁵⁄₁₆" Pitch - British Standard

NV330 - Sprocket - 14T x ½" x ⁵⁄₁₆" Pitch - British Standard

NV330 - Sprocket - 14T x ½" x ⁵⁄₁₆" Pitch - British Standard Technical Details: Manufactured to DIN 8187 ISO/R-606 Machined Faced Machined Bored (See Product List for sizes) Machined Gearcut (See Product List for Pitch & Tooth Thickness)   Product Codes: NV330 --...

View More
Wishlist
Compare
NV336 - Drive Gear - Steel - 66T x 6dp, 1" or 1 ¼” Wide

NV336 - Drive Gear - Steel - 66T x 6dp, 1" or 1 ¼” Wide

NV336 - Drive Gear - Steel - 66T x 6dp, 1" or 1 ¼”  Wide Technical Details: Material: Bright Mild Steel Manufactured: To BS 436 Machined: Faced Machined: Bored (See Product List for sizes) Machined: Gearcut (See Product List for Pitch & Tooth Thickness) Machined: Keyway (...

View More
Wishlist
Compare
NV337 - Shutter Guide Bolts

NV337 - Shutter Guide Bolts

NV337 - Shutter Guide Bolts ...

View More
Wishlist
Compare
NV338 - Platewheel - 60T x 1/2" Pitch

NV338 - Platewheel - 60T x 1/2" Pitch

NV338 - Platewheel 60T x 1/2" Pitch Technical Details: Manufactured to DIN 8187 ISO/R-606 Machined Faced Machined Bored (See Product List for sizes) Machined Gearcut (See Product List for Pitch & Tooth Thickness)   Product Codes: NV338 - Platewheel 60T x 1/2" Pit...

View More
Wishlist
Compare
NV339 - Sprocket & Plate Adaptor - 15T x ½" x ⁵⁄₁₆" Pitch

NV339 - Sprocket & Plate Adaptor - 15T x ½" x ⁵⁄₁₆" Pitch

NV339 - Sprocket & Plate Adaptor - 15T x ½" x ⁵⁄₁₆" Pitch Technical Details: Bright Mild Steel Machined Bore Welded Plate & Machined Macined Faced Machined Gearcut Sprocket Plain Bore or Bushed Drilled & Countersunk 4 Holes Suitable for Plastic Chain Wheels Pr...

View More
Wishlist
Compare
NV340 - Sprocket - 18T x ½" x ⁵⁄₁₆" Pitch - British Standard

NV340 - Sprocket - 18T x ½" x ⁵⁄₁₆" Pitch - British Standard

NV340 - Sprocket - 18T x ½" x ⁵⁄₁₆" Pitch - British Standard Technical Details: Manufactured to DIN 8187 ISO/R-606 Machined Faced Machined Bored (See Product List for sizes) Machined Gearcut (See Product List for Pitch & Tooth Thickness)   Product Codes: NV340 --...

View More
Wishlist
Compare
NV342 - Sprocket - 45T x ½" x ⁵⁄₁₆" Pitch - British Standard

NV342 - Sprocket - 45T x ½" x ⁵⁄₁₆" Pitch - British Standard

NV342 - Sprocket - 45T x ½" x ⁵⁄₁₆" Pitch - British Standard Technical Details: Manufactured to DIN 8187 ISO/R-606 Machined Faced Machined Bored (See Product List for sizes) Machined Gearcut (See Product List for Pitch & Tooth Thickness)   Product Codes: NV342 --...

View More
Wishlist
Compare
NV346 - End Lock - Cast - 3" Lath (Pair)

NV346 - End Lock - Cast - 3" Lath (Pair)

NV346 - End Lock - Cast - 3" Lath (Pair) Tecnical Detail: Malleable Cast Iron Zoinc Plated 2 Holes drilled to suit 4.8mm Ø Rivet Body 44mm L x 81mm W including wings Desinged originally to suit Bridge Steel Lath ...

View More
Wishlist
Compare
NV347 - Platewheel - 42T x 5/8" Pitch

NV347 - Platewheel - 42T x 5/8" Pitch

Product Codes: NV347 PLATEWHEEL - 42T x 5/8" - PILOT BORE NV347A PLATEWHEEL - 42T x 5/8" - 1.7/8" BORE, 4 HOLES   Please Note: Some Variants maybe made to order only. For any size not listed please contact the office on 01282 615239 or sales@nvmgroup.co.uk ...

View More
Wishlist
Compare
NV353 - Drive Pinion - Steel - 12T x 6DP x 25mm Wide

NV353 - Drive Pinion - Steel - 12T x 6DP x 25mm Wide

NV353 - Drive Pinion - Steel - 12T x 6DP x 25mm Wide Technical Details: Manufactured to BS 436 Machined Faced Machined Bored (See Product List for sizes) Machined Gearcut (See Product List for Pitch & Tooth Thickness) Machined Keyway (See Product List for Bore details) Materia...

View More
Wishlist
Compare
NV354 - Drive Gear - Steel - 48T x 6DP

NV354 - Drive Gear - Steel - 48T x 6DP

NV354 - Drive Gear - Steel - 48T x 6DP Technical Details: Material: Bright Mild Steel Manufactured: To BS 436 Machined: Faced Machined: Bored (See Product List for sizes) Machined: Gearcut (See Product List for Pitch & Tooth Thickness) Machined: Keyway (See Product List for Bo...

View More
Wishlist
Compare
NV356 - Platewheel - 72T x 1/2" Pitch

NV356 - Platewheel - 72T x 1/2" Pitch

NV356 - Platewheel - 72T x 1/2" Pitch Product Codes: NV356 --- 72T x 1/2" Pitch Platewheel - 4 Holes 17⁄8" Bore NV356A - 72T x 1/2" Pitch Platewheel - Pilot Bore NV356B - 72T x 1/2" Pitch Platewheel - 3 Holes 32mm Bore NV356C - 72T x 1/2" Pitch Platewheel - 3 Holes...

View More
Wishlist
Compare
NV358 - Wind Lock - Cast - Self-Colour

NV358 - Wind Lock - Cast - Self-Colour

NV358 - Wind Lock - Cast - Self- Colour Technical Details: Self- ColourFinish Not Drilled Body 110mm L x 45mm W at the Guide Side ...

View More
Wishlist
Compare
NV359 - Drive Pinion - Steel - 22T x 5dp, 30mm Wide with 50mm Keywayed Boss

NV359 - Drive Pinion - Steel - 22T x 5dp, 30mm Wide with 50mm Keywayed Boss

NV359 22T x 5DP Steel Gear with 50mm Wide Boss This product is made to order only....

View More
Wishlist
Compare
NV362 - Drive Gear - Steel - 30T x 6dp, 1" Wide

NV362 - Drive Gear - Steel - 30T x 6dp, 1" Wide

NV362 - Drive Gear - Steel - 30T x 6dp, 1" Wide Technical Details: Material: Bright Mild Steel Manufactured: To BS 436 Machined: Faced Machined: Bored (See Product List for sizes) Machined: Gearcut (See Product List for Pitch & Tooth Thickness) Machined: Keyway (See Product Li...

View More
Wishlist
Compare
NV364 - Platewheel - 57T x 1/2" Pitch

NV364 - Platewheel - 57T x 1/2" Pitch

NV364 - Platewheel - 57T x 1/2" Pitch   Product Codes: NV364 --- 57T x 1/2" Pitch Platewheel - Plain 1" Bore NV364A - 57T x 1/2" Pitch Platewheel - Drilled 3 Holes NV364B - 57T x 1/2" Pitch Platewheel - Duplex 4 Holes NV364C - 57T x 1/2" Pitch Platewheel with...

View More
Wishlist
Compare
NV365 - End Block - Cast - Universal Block 4" Tube

NV365 - End Block - Cast - Universal Block 4" Tube

NV365 - End Block - Cast - Universal Block 4" Tube A Universal Casting that is pre-drilled and tapped to accept either Platewheels or Drive Gears, and also has a solid boss on the inside to accept torsion springs. The Drive End Casting has a Machined Spigot, whilst the Non Drive End is plain. ...

View More
Wishlist
Compare
NV366 - Double Reduction Set - Sprocket 18T x ½" x ⁵⁄₁₆" Pitch & Platewheel 60T x ½" x ⁵⁄₁₆" Pitch

NV366 - Double Reduction Set - Sprocket 18T x ½" x ⁵⁄₁₆" Pitch & Platewheel 60T x ½" x ⁵⁄₁₆" Pitch

NV366 - Double Reduction Set - Sprocket 18T x ½" x ⁵⁄₁₆" Pitch & Platewheel 60T x ½" x ⁵⁄₁₆" Pitch Technical Details: Manufactured to DIN 8187 ISO/R-606 Machined Faced Machined Bored (See Product List for sizes) Machined Gearcut (See Product List for Pitch & Tooth Thickness) ...

View More
Wishlist
Compare
NV369 - Endlocks - Cast - For 2" Flat Lath

NV369 - Endlocks - Cast - For 2" Flat Lath

NV369 - Endlocks - Cast - For 2" Flat Lath Stock clearance only. Limited Offer. Sold as per Each. Zinc Plated Malleable Cast Pre-Holed  ...

View More
Wishlist
Compare
NV371 - Wind Lock - Cast - Zinc Plated & Drilled

NV371 - Wind Lock - Cast - Zinc Plated & Drilled

NV371 - Wind Lock - Cast - Zinc Plated & Drilled Technical Detail: Grey Cast Iron Zinc Plated Drilled 3 Holes to suit 4.8mm Ø Rivet Body: mm L x mm W ...

View More
Wishlist
Compare
NV372 - Pinson Bracket - Cast - Self-Colour & Drilled

NV372 - Pinson Bracket - Cast - Self-Colour & Drilled

NV372 - Pinson Bracket - Cast - Self-Colour & Drilled For additional support to the Lath when fixing Pinson Locks Tecnical Detail: Malleable Cast Iron Self - Colour Drilled 3 Holes 5mm Ø & countersunk 8.5mm x 7mm Deep 1 Cast Hole 20mm Ø Body 125mm L x 40mm W  ...

View More
Wishlist
Compare
NV373 - Drive Gear - Steel - 54T x 6dp, 25mm Wide

NV373 - Drive Gear - Steel - 54T x 6dp, 25mm Wide

NV373 Steel Gear - 54T x 6DP, 25mm Wide, 1" Bush Technical Details: Material: Bright Mild Steel Manufactured: To BS 436 Machined: Faced Machined: Bored (See Product List for sizes) Machined: Gearcut (See Product List for Pitch & Tooth Thickness) Machined: Keyway (See Prod...

View More
Wishlist
Compare
NV375 - Wind Lock - Cast - Reverse Type

NV375 - Wind Lock - Cast - Reverse Type

NV375 - Wind Lock - Cast -  Reverse Type Technical Detail: Grey Cast Iron Self-Colour Not Drilled ...

View More
Wishlist
Compare
NV379 - Spring Anchor - Steel - 75mm Ø Boss

NV379 - Spring Anchor - Steel - 75mm Ø Boss

NV379 - Spring Anchor - Steel -  75mm Ø Boss Technical Details: Bright Mild Steel Machined Bore Welded Lasercut Plate Plain Bore Boss Sizes 75mm Ø x 115mm O/All 15mm Mild Steel Plate 154mm Ø   Product Code: NV379 ----- SPRING ANCHOR - STEEL - 1.1/4" BOR...

View More
Wishlist
Compare
NV380 - Spring Anchor - Steel - 70mm Ø Boss

NV380 - Spring Anchor - Steel - 70mm Ø Boss

NV380 - Spring Anchor - Steel -  70mm Ø Boss Technical Details: Bright Mild Steel Machined Bore Plain Bore Boss Sizes 70mm Ø x 75mm Long No Flat Plate   Product Code: NV380 --- SPRING ANCHOR - STEEL - 1" BORE, 70mm Ø BOSS NV379A - SPRING ANCHO...

View More
Wishlist
Compare
NV381 - Drive Pinion - Steel - 24T x 6DP x 28mm Wide

NV381 - Drive Pinion - Steel - 24T x 6DP x 28mm Wide

NV381 - Drive Pinion - Steel - 24T x 6DP x 28mm Wide Technical Details: Manufactured to BS 436 Machined Faced Machined Bored (See Product List for sizes) Machined Gearcut (See Product List for Pitch & Tooth Thickness) Machined Keyway (See Product List for Bore details) Materia...

View More
Wishlist
Compare
NV383 - Support Cup - Steel - 20mm Slot

NV383 - Support Cup - Steel - 20mm Slot

NV383 - Support Cup - Steel - 20mm Slot Technical Details: Plain Mild Steel Flame cut Machined Face Machined Slot 20mm Wide Drilled 3 holes 11mm Ø Counterborded 3 holes 18mm Ø x 11mm Deep   Dims: 80mm x 80mm x 30mm Wide Please Note: Some Variants maybe mad...

View More
Wishlist
Compare
NV385 - Barrel Gear - Steel - 40T x 5dp, 25mm or 40mm Wide

NV385 - Barrel Gear - Steel - 40T x 5dp, 25mm or 40mm Wide

NV385 - Barrel Gear - Steel - 40T x 5dp, 25mm or 40mm Wide Technical Details: Material: Bright Mild Steel Manufactured: To BS 436 Machined: Faced Machined: Bored (See Product List for sizes) Machined: Gearcut (See Product List for Pitch & Tooth Thickness) Machined: Keyway (See...

View More
Wishlist
Compare
NV386 - Support Cup - Pressed Steel -Slotted & Zinc Plated

NV386 - Support Cup - Pressed Steel -Slotted & Zinc Plated

NV386 - Support Cup - Pressed Steel -Slotted & Zinc Plated Technical Details: Pressed Steel Zinc Plated 2no Pre-Punched Holes 7mm Ø 17mm Slot Slotted side Holes 16mm x 6mm Product Codes: NV386 --- Pressed Steel Support Cup - Slotted NV386A - Pressed Steel ...

View More
Wishlist
Compare
NV394 - Support Cup - Steel - Plain & 25mm Slot

NV394 - Support Cup - Steel - Plain & 25mm Slot

NV394 - Steel Support Cup - 25mm Slot ...

View More
Wishlist
Compare
NV397 - Idler Gear - Steel - 42T x 5dp, 1" Wide

NV397 - Idler Gear - Steel - 42T x 5dp, 1" Wide

NV397 - Idler Gear - Steel - 42T x 5dp, 1" Wide Product Codes: NV397 --- Idler Gear - 42T x 5dp - 1" Wide, 1.1/4" Plain Bore NV397B - Idloer Gear - 42T x 5dp - 1" Wide, 1" Bushed Please Note: Some Variants maybe made to order only. For any size not listed please contact ...

View More
Wishlist
Compare
NV404 - Wind Lock - Cast - Drilled & Zinc Plated

NV404 - Wind Lock - Cast - Drilled & Zinc Plated

NV404 - Wind Lock - Cast - Drilled & Zinc Plated...

View More
Wishlist
Compare
QI1002 - End Lock - Cast - For 100mm Insulated Steel Lath, Zinc Plated

QI1002 - End Lock - Cast - For 100mm Insulated Steel Lath, Zinc Plated

QI1002 - End Lock - Cast - For 100mm Insulated Steel Lath, Zinc Plated Technical Details: Grey Cast Iron Zinc Plated Suitable for using with 100mm Steel Insualted Lath    ...

View More
Wishlist
Compare
SP001 - Platewheel - 38T

SP001 - Platewheel - 38T

SP001 38T x 5/8" PLATEWHEEL - m/c to Drg. R10228-SK1 ...

View More
Wishlist
Compare
SP002 - Platewheel - 48T

SP002 - Platewheel - 48T

SP002 - 48T Platewheel - British Standard Product Codes: 1/2" Pitch: SP002E - PLATEWHEEL - 48T x 1/2" - 1" BORE SP002G - PLATEWHEEL - 48T x 1/2" - 1" BORE SP002A - PLATEWHEEL - 48T x 1/2" - 1.7/8" x 4 HOLES SP002H - PLATEWHEEL - 48T x 1/2" - 30mm Bore SP002F -...

View More
Wishlist
Compare
SP003 - Platewheel - 50T x 5/8" Pitch

SP003 - Platewheel - 50T x 5/8" Pitch

SP003 50T x 5/8" PLATEWHEEL - 1" BORE Please Note: Some Variants maybe made to order only. For any size not listed please contact the office on 01282 615239 or sales@nvmgroup.co.uk ...

View More
Wishlist
Compare
SP004 - Platewheel - 76T x 1/2" Pitch - Duplex

SP004 - Platewheel - 76T x 1/2" Pitch - Duplex

  SP004 76T x 1/2" DUPLEX PLATEWHEEL - 1.1/2" BORE Please Note: Some Variants maybe made to order only. For any size not listed please contact the office on 01282 615239 or sales@nvmgroup.co.uk ...

View More
Wishlist
Compare
SP005 - Platewheel - 72T x 1/2" Pitch

SP005 - Platewheel - 72T x 1/2" Pitch

  Product Codes: SP005 72T x 1/2" DUPLEX PLATEWHEEL - DRILLED SP005A 72T x 1/2" DUPLEX PLATEWHEEL - PILOT BORE Please Note: Some Variants maybe made to order only. For any size not listed please contact the office on 01282 615239 or sales@nvmgroup.co.uk ...

View More
Wishlist
Compare
SP006 - Platewheel - 47T x 5/8" Pitch

SP006 - Platewheel - 47T x 5/8" Pitch

Product Codes: SPOO6 47T x 5/8" Pitch Platewheel - 1" Plain Bore Please Note: Some Variants maybe made to order only. For any size not listed please contact the office on 01282 615239 or sales@nvmgroup.co.uk ...

View More
Wishlist
Compare

Leading Supplier of Roller Shutter Components

North Valley Metal are the largest supplier of Roller Shutter Components in the UK. Our extensive range includes Barrel Castings, Gears, Pinions, Platewheels & Sprockets, Cups, Torsion Springs, Wind Locks & Endlocks, and a range of ancillary products that is second to none.

NVM has been a supplier to the Roller Shutter and Industrial Door market since 1966 and has built up and extensive range of Roller Shutter Components to service the Garage Door, Sectional Door, Fire Shutter and Manually Operated Shutter industry.

Our range of Castings are available from 4" Ø Tube to 10" Ø Tube, and include End Blocks, Inner Blocks in Steel, Cast & Plastic, Spring Blocks, Spring Anchors, Bearing Blocks, Barrel Gears, Drive Pinions & Gears, Idler & Compound Gears for Single & Double Reduction Sets, Torsion Springs for Manually Operated and Spring Assisted Shutters up to 8" Ø, Support Cups in Steel and Cast, a comprehensive range of Chainewheels, Chain, Transmission Drive including Platewheels & Sprockets, Wind Locks and End Locks in Cast, Plastic, Nylon and Pressed Steel.

In fact if we dont have it, then there is a fair chance it doesnt exisit. If you can't find what you are looking for, then please give the office a call on 01282 615239 or email sales@nvmgroup.co.uk