ND3500E - NVM 500nm DIRECT DRIVE - 3 phase Electronic Limits - 40mm Shaft - 8rpm (Brand: North Valley Metal)

NDE500 - NVM 500nm DIRECT DRIVE - 3 phase Electronic Limits - 40mm Shaft - 8rpm, pre-wired to NDC511 CONTROL PANEL

• NDE500A - NVM 500nm DIRECT DRIVE - 3 phase Electronic Limits - 40mm Shaft - 8rpm & Ppre-wired  NDC511 CONTROL PANEL with 5 Metre CABLES
• NDE500B - NVM 500nm DIRECT DRIVE - 3 phase Electronic Limits - 40mm Shaft - 8rpm & Ppre-wired  NDC511 CONTROL PANEL with 7 Metre CABLES
• NDE500C - NVM 500nm DIRECT DRIVE - 3 phase Electronic Limits - 40mm Shaft - 8rpm & Ppre-wired  NDC511 CONTROL PANEL with 11 Metre CABLES

Features:

ND3500E - 500nm Direct Drive Operator

• Low Level De-Clutch
• Low Level Manual Over-ride & Haul Chain
• Electronic Limits
• Built In Encoder
• Built In Antifall Back
• Assembled & Tested in thr UK

Technical Details

• Operation temp; -20 Degrees  - + 45 Degrees
• Max Turns – 20
• Max run time – 25 MINS
• Output torque – 500NM
• Output speed – 8 RPM
• Output current – 4.5 Amps
• Motor Power – 1200 Watts
• Power supply - AC380 -415V/50HZ

NDC501 - Control Panel

Functionality as standard;

• 3ph – 2.2kw
• Compatible with both Opto and 8.2K resistive safety edges.
• Suitable for both MECH – ELEC Limits.
• Volt Free – N/O Manual switching capability.
• 3 button Up,Down,Stop on front cover.
• Photocell compatible.
• Independent n/c safety circuits
• Easily programable limits from low level; (if ELEC)
• Deadman – semi auto or auto running programmable through DiP Switch.
• LED Safety Indicators and LED Error Indication.
• Additional extras;
  • Induction loop module
  • Receiver and Transmitters
  • Bluetooth Module for Easy Programming

NDC151 & NDC152 PREPARED CABLING

• 1.5mm 7 Core YY
• 1.0mm 7 Core YY
• 20mm Grommets
• 20mm Connectors
• 5 Pin 3ph Plug
• Cables cut and fitted 5 Metre, 7 Metre or 11 Metre Lengths

Availability Options:

• Pre-wired with NDC511 Control Panel in 5m / 7m / 11m  Cable Lengths
• As complete kit including Direct Drive Operator, Pre-Wired Control Panel, Endplate Kit.with Plates, Footmount and all accesories.
• Direct Drive Operator & Panel also sold separately.