NDS3150 - NVM DIRECT DRIVE - 150nm - 3 phase Electronic Limits - 25.4mm Shaft - 24rpm - pre-wired CONTROL PANEL (Brand: North Valley Metal)

NDS3150 - NVM 150nm DIRECT DRIVE - 3 ph -  Electronic Limits - 25.4mm Shaft - 24rpm - with pre-wired NDC511 CONTROL PANEL & CABLES

Pre-Wired Options

• NDS3150A - NDS3150E - 150nm Direct Drive Operator - NDC501 Control Panel pre-wired with 5 Metre Cables
• NDS3150B - NDS3150E - 150nm Direct Drive Operator - NDC501 Control Panel pre-wired with 7 Metre Cables
• NDS3150C - NDS3150E - 150nm Direct Drive Operator - NDC501 Control Panel pre-wired with 11 Metre Cables

NDS3150E - 150nm DIRECT DRIVE

Features:

• Low Level De-Clutch
• Low Level Manual Over-ride & Haul Chain
• Electronic Limits
• Built In Encoder
• Built In Antifall Back
• Assembled & Tested in thr UK
• Comes with; as standard
  • Mounting bracket  
  • Fixings
  • Keyway
  • Collars

Technical Details

• Operation temp; -20 Degrees  - + 45 Degrees
• Max Turns – 20
• Max run time – 25 MINS
• Output torque – 150NM
• Output speed – 24 RPM
• Output current – 2.92 Amps
• Motor Power – 650 Watts
• Power supply - AC380 -415V/50HZ
• Chain operated Spring loaded - Manual override
• Thermal cut off
• Safety circuit protection on override
• Electronic limits – KOSTAL ENCODER
• Suits 25.4mm shaft

NDC501 CONTROL PANEL

Functionality as standard;

• 3ph – 2.2kw
• Compatible with both Opto and 8.2K resistive safety edges.
• Suitable for both MECH – ELEC Limits.
• Volt Free – N/O Manual switching capability.
• 3 button Up,Down,Stop on front cover.
• Photocell compatible.
• Independent n/c safety circuits
• Easily programable limits from low level; (if ELEC)
• Deadman – semi auto or auto running programmable through DiP Switch.
• LED Safety Indicators and LED Error Indication.
• Additional extras;
  • Induction loop module
  • Receiver and Transmitters
  • Bluetooth Module for Easy Programming

NDC151 / NDC152 CABLES

• 1.5mm 7 Core YY
• 1.0mm 7 Core YY
• 20mm Grommets
• 20mm Nuts
• Connectors
• Cables prepped 5 Metre, 7 Metre, 11 Metre

Available Options:

• Can be supplied as Drive Operator onlyPre-wired with NDC511 Control Panel in 5m / 7m / 11m  Cable Lengths
• As complete kit including Direct Drive Operator, Pre-Wired Control Panel, Endplate Kit.with Plates, Footmount and all accesories.
• Flange Adaptor 
• Direct Drive Operator & Panel sold separately